Rockwell-automation 1746-HSTP1 Stepper Controller Module/ User Manual Manual de usuario descargar pdf (Pagina 68)

Publication 999-121 - December 1999

Application Examples

6-5

To enter negative position data by manipulating the bits manually:

1. Divide the absolute value into MSW, LSW.

2. Enter both MSW and LSW into the position MSW,LSW via

decimal.

3. Change radix to binary.

4. Set MSB (15) of the MSW.

To enter negative position data by calculating manually:

1. Divide the absolute value into MSW, LSW.

2. Enter the LSW value directly into position LSW.

3. Add the value of MSW to -32768.

4. Place the value into position MSW.

For example:

1. –5999 / MSW,LSW = 5, 999

2. Assign position LSW = 999

3. 5 + (–32768) = –32763

4. Assign position MSW = –32763

Converter Example

The following diagram shows the ladder programming for a converter.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 81 82

Sin comentarios

Rockwell-automation 1746-HSTP1 Stepper Controller Module/ User Manual Manual de usuario Pagina 68