Rockwell-automation 1771-DB Basic Module User Manual - Series A Manual de usuario descargar pdf (Pagina 45)

Operating Functions

Chapter 5

5–8

Variations: Two variations of the LIST command are possible with the

BASIC Module.

They are:

1. LIST [ln num] (cr) and

2. LIST [ln num] – [ln num] (cr)

The first variation causes the program to print from the designated

line number (integer) to the end of the program. The second variation

causes the program to print from the first line number (integer) to the

second line number (integer).

Important: You must separate the two line numbers with a dash

(–).

Example:

READY

uLIST

u10 PRINT “LOOP PROGRAM”

u20 FOR I=1 TO 3

u30 PRINT I

u40 NEXT I

u50 END

READY

uLIST 30

u30 PRINT I

u40 NEXT I

u50 END

READY

uLIST 20–40

u20 FOR I=1 TO 3

u30 PRINT I

u40 NEXT I

Action taken: The LIST# or LIST@ command lists the program to

the device attached to the peripheral port (LIST device). All comments

that apply to the LIST command apply to the LIST# or LIST@

commands. We include these commands to permit you to make “hard

copy printouts” of a program. A configuration plug sets the baud

rate and must match your list device (see section 3.2.4 titled,

“Configuration Plugs”). Also, you must configure the peripheral port

parameters to match your particular list device (see section 5.8.1

titled, “Peripheral Port Support – Parameter Set – CALL 30”).

5.3.3

Command: LIST

(continued)

5.3.4

Command: LIST# or LIST

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 166 167

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1771-DB Basic Module User Manual - Series A Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1771-DB Basic Module User Manual - Series A