Rockwell-automation 1772-LV Mini-PLC - 2/15 Programmable Controller (S Manual de usuario Pagina 200

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 215
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 199
Glossary
Appendix B
B7
the application cycle, certain data files are compared to the data table.
whenever a discrepancy is detected, a printed report describes the type of
problem and its location.
False
As related to PC instructions, a disabling logic state. Fault
Any malfunction which interferes with normal application operation.
Feedback
The signal or data sent to the PC from a controlled machine or process to denote
its response to the command signal.
Fence Codes
Special user-programmed PC instructions which control and delimit specific
program areas such as fault zones and conditional ignore zones.
Force Off Function
A feature which allows the user to de-energize, independent of the PC program,
any input or output by means of the program panel.
Force On Function
A feature which allows the user to energize, independent of the PC program,
any input or output by means of the program panel.
Get Byte Instruction
A PC instruction which accesses either the upper or lower 8-bit byte of an
addressed 16 bit data table word. This instruction functions only with limit test
instructions.
Hard Contact
Any type of physical switch contacts. Contrasted with electronic switching
devices, such as triacs and transistors.
Hard Copy
Any form of printed document such as ladder diagram program listing, paper
tape, or punched cards.
Hardware
The mechanical, electrical and electronic devices which compose a
programmable controller and its application.
Image Table
An area in PC memory dedicated to I/O data. Ones and zeroes (“1” and “0”)
represent on and off, respectively, conditions. During every I/O scan, each input
controls a bit in the input image table; each output is controlled by a bit in the
output image table.
Immediate Input Instruction
A PC instruction that immediately transfers input data from selected input
Vista de pagina 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 214 215

Comentarios a estos manuales

Sin comentarios