Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Manual de usuario descargar pdf (Pagina 37)

ControlNet-to-DeviceNet Linking Device 37

Publication

1788-IN052D-EN-P - February 2007

View and Interpret Controller Status Tags

Use the following procedure to troubleshoot the DeviceNet network

using the controller status tags in RSLogix5000 software.

1. Use RSLogix5000 software to verify that the controller is in run

mode and that the program is online with the controller.

2. In the program’s organization tree, double-click Controller

Tags.

The Controller Tags display.

96 Communication port is in test mode. None.

97 The controller has placed the scanner

in halt mode.February

If the

O.CommandRegister.HaltScanner

bit is on, turn it off then cycle

scanner power.

98 General firmware error. Replace device.

99 System Failure. Replace device.

DeviceNet Status Codes

Status Code Description of Status Recommended Action

Double-click to

open.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Sin comentarios

Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Manual de usuario Pagina 37