Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Manual de usuario descargar pdf (Pagina 41)

ControlNet-to-DeviceNet Linking Device 41

Publication

1788-IN052D-EN-P - February 2007

5. If need to troubleshoot Status Register tags, use the following

table as a reference to interpret module or network status.

Status Register Tag Values

If Tag Member Displays

Value

Then Status Is

Run 0 Scanner in idle mode.

Run 1 Scanner in run mode.

Fault 0 Scanner not faulted.

Fault 1 Scanner faulted.

DisableNetwork 0 Scanner not disabled.

DisableNetwork 1 Scanner disabled.

DeviceFailure 0 Scanner communicating with all devices.

DeviceFailure 1 Scanner not communicating with at least 1 device.

AutoVerify 0 Data size of each device matches the amount of

memory allocated for the device in the scanner.

AutoVerify 1 Data size of at least 1 device does not match the

amount of memory allocated for the device in the

scanner.

CommFailure 0 No network-wide communication problem exists

CommFailure 1 Network-wide communication problem exists

DupNodeFail 0 Scanner is on the network at a unique address

DupNodeFail 1 Scanner is trying to get on the network at an

address that is already in use.

DnetPowerDetect 0 Network connector of the scanner has power.

DnetPowerDetect 1 Network connector of the scanner does not have

power.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Sin comentarios

Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Manual de usuario Pagina 41