Rockwell-automation 1791R-XXXX CompactBlock Distributed I/O on Remote Manual de usuario descargar pdf (Pagina 11)

CompactBlock Distributed I/O on Remote I/O Series D 11

Publication

1791R-IN002B-EN-P - August 2003

Mount the Block(s)

The base and expansion modules mount to a panel or DIN rail which must be

grounded before installing the module(s).

Base Module Mounting

Install the CompactBlock base module on a panel or DIN rail.

DIP

Switch

No. Description ON OFF

SW2

1 Comm Rate

00=57.6K 01=115.2K

10=230.4K 11=230.4K

2 Comm Rate

3 N/A

4 Hold Last State Hold Last State Output Reset

5 Processor Restart/Lockout Lockout Restart

6 Last I/O Last Rack Not Last Rack

7 Filter Speed Setting

00=2ms 10=4ms

01=8ms 11=16ms

8 Filter Speed Setting

!

WARNING

When used in a Class I, Division 2, hazardous

location, this equipment must be mounted in a suitable

enclosure with proper wiring method that complies

with the governing electrical codes.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comentarios a estos manuales

Sin comentarios