Rockwell-automation 20-COMM-E PowerFlex EtherNet/IP Adapter Manual de usuario descargar pdf (Pagina 83)

Configuring the I/O 4-37

20-COMM-E EtherNet/IP Adapter User Manual

Publication 20COMM-UM010G-EN-P

Create SLC 500 Ladder Logic for the Logic Command, Reference, and Datalink In

1. Insert another separate rung.

2. Double-click the rung to display the rung editor.

3. Enter MSG WRITE 500CPU LOCAL Nxx:n, where:

xx is an unused data file number (for example, N12:n), and

n is an unused element of the data file chosen for xx (for example, N12:0

)

4. Press Enter.

5. Insert another separate rung.

6. Double-click the rung to display the rung editor.

7. Enter BST XIC Nxx:n/DN NXB XIC Nxx:n/ER BND OTU Nxx:n/

EN, where:

xx and n must correspond to the assigned data file number and element

(for example, N12

:0) for the message created in steps 1…4.

Important:The information must be entered with appropriate numbers

for ‘xx’ and ‘n’ for your application, and with spaces and

forward slashes exactly as shown.

8. Press Enter.

9. In the MSG instruction (Figure 4.17

), double-click Setup Screen to

launch the message configuration screen (Figure 4.18

Figure 4.17 SLC 500 Ladder Logic for the Logic Command, Reference, and

Datalink In

10. Configure the General tab field by entering or verifying the information

shown in the message configuration screen.

Steps 1…4

Steps 5…8

Step 9

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 295 296

Sin comentarios

Rockwell-automation 20-COMM-E PowerFlex EtherNet/IP Adapter Manual de usuario Pagina 83