Rockwell-automation 2755 AtomScan Bar Code Reader Manual de usuario descargar pdf (Pagina 78)

5–33Configuring Your Reader

Publication 2755-6.9

For a sequence on a No Read, refer to the following table. When

disabled, the reader does not sequence (increment or decrement)

on a No Read. When enabled, the reader sequences on every No

Read.

Command Example

Status

0 = Disabled If 001, 002, No Read, then search for 003.

1 = Enabled If 001, 002, No Read, then search for 004.

For a sequence on every mismatch, refer to the following table.

When disabled, if a mismatch is out of sequence by more than 1,

the sequence resumes. When enabled, the reader sequences the

on every mismatch.

Command Example

Status

0 = Disabled If 001, 002, 004 (mismatch), then search for 005.

1 = Enabled If 001, 002, mismatch, then search for 004.

• New Master Pin

Command Parameter Format Example

Status

0 = Disabled

Kz <Kzstatus>

To enable New Master Pin, press

[<Kz1>]

1 = Enabled

Kz <Kzstatus>

[<Kz1>].

• Number of Labels. You can use any number between 1 and 6.

The default is 1. The multilabel separator is any valid ASCII

character.

Parameter Format Example

<KLnumber, multilabel

separator>

To change Number of Labels to 3, press

[<KL3>].

• Operations Status Request. Allows you to return the status of

each command in the group.

Parameter Format

KV <KV?>

Code Types Commands

• Narrow Margins

Command Parameter Format Example

Status

<Konarrow margin

0 = Disabled

<Konarrow margin

status,symbology ID

To enable Narrow Margins, press

[<Ko1>]

1 = Enabled

status,symbology ID

status>

[<Ko1>].

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 140 141

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 2755 AtomScan Bar Code Reader Manual de usuario Pagina 78

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 2755 AtomScan Bar Code Reader