Rockwell-automation 56AMXN/B ControlLogix AutoMax Comm Module Manual de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
Page 58 AutoMax DCSNet /RE RIO Module
Publication number 56AMXN-UM002A-EN-P November 2002
Msg Recv, counts packets successfully received by the module
Recv Timeouts, applies only when the module is the DCS master.
They occur when a reply packet isn’t received within the timeout
period.
CRC Errors, counts packets received with CRC errors
OverRun Errors, counts packets received that are longer than 272
bytes
Abort Errors, increments when the module starts to receive a packet
but the packet is never completed, for whatever reason
AutoMax Diagnostic counters apply to both DCS and Remote I/O
operation.
ControlLogix Backplane Diagnostic Counters
The ControlLogix Backplane Counters include:
Counter Description
Bad Multicast
CRC
the number of multicast receive CRC errors since the
last power-on or reset
Mcast CRC
Error Threshold
the threshold for entering fault state due to multicast
CRC errors, can be set in RSLogix 5000
Rx Bad CRC the number of directed receiver CRC errors since the
last power on or reset
Rx Rx Bus
Timeout
the number of receiver bus timeouts since the last
power on or reset
Tx Bad CRC the number of transmitter bus timeouts since the last
power on or reset
Tx Bus Timeout the number of transmit bus timeouts since the last
power on or reset
Tx Retry Limit number of times to retry a frame if a transmit error
occurs
ICP Status current status of the ICP object on the module
Slot the module’s rack and slot address
Rack Revision revision of the primary rack
Rack Serial
Number
serial number of the primary rack
Rack Slot Count number of slots in the primary rack
Table 20 Backplane Diagnostic Counters
AutoMax Diagnostic counters apply to both DCS and Remote I/O
operation.
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 71 72

Comentarios a estos manuales

Sin comentarios