Rockwell Automation 22-WIM-N4S Manual de usuario descargar pdf (Pagina 23)

Configuring the WIM 3-3

2. Select Connect > New from the menu list. The New Connection

Wizard (Figure 3.2

) appears.

Figure 3.2 New Connection Wizard Screen

3. Select the “Bluetooth” radio button and tap Next ->. The “Where is

your destination?” screen (Figure 3.3

) appears.

Figure 3.3 “Where is your destination?” Screen

4. Select one of the radio button choices:

• Local - point-to-point: Choose “Local” if you want to connect

only to a local drive using the WIM. Selecting “Local” and

tapping Next -> displays the “Local Connection” screen

(Figure 3.4

) which requests you to name the connection for later

reuse.

• Remote - routed over a network: Choose “Remote” if you want

to connect to a local drive using the WIM and then route through it

to a remote device on DeviceNet™ (via 22- COMM-D adapter),

ControlNet™ (via 22-COMM-C adapter) or EtherNet/IP (via

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Sin comentarios

Rockwell Automation 22-WIM-N4S Manual de usuario Pagina 23