Rockwell Automation 22-WIM-N4S Manual de usuario descargar pdf (Pagina 29)

Configuring the WIM 3-9

1. From the drive StatusMonitor screen (Figure 3.9), tap the Port menu

and select the drive port to which the WIM is connected. For this

example, Port 1 is selected (Figure 3.15

) because the WIM is

installed in the drive’s bottom RJ-45 port. The WIM StatusMonitor

screen (Figure 3.16

) appears.

2. On the WIM StatusMonitor screen (Figure 3.16

), tap the stylus on

the white area above the “22-WIM-Nx” catalog number to display

the User Text entry screen (Figure 3.17

). In the text box, enter the

desired name for the WIM (for example, Pump 1 shown in

Figure 3.18) and tap OK. The WIM StatusMonitor screen reappears

with the entered name.

3. For the entered name to be recognized on the network, either reset

the WIM or power cycle the drive. Then re-establish wireless

communication between the WIM and Pocket PC.

Figure 3.15 Port Selection Screen Figure 3.16 WIM StatusMonitor Screen

Figure 3.17 User Text Entry Screen Figure 3.18 Pump 1 Screen

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

Sin comentarios

Rockwell Automation 22-WIM-N4S Manual de usuario Pagina 29