Rockwell Automation 22-WIM-N4S Manual de usuario descargar pdf (Pagina 33)

Configuring the WIM 3-13

The “PowerFlex 40” connection window (Figure 3.23) re-appears,

but this time with the “COM1 on PowerFlex…” icon lit up in green,

indicating that a wireless communication connection now exists.

Figure 3.23 PowerFlex 40 Connection Window with Lit Green Icon

5. Launch DriveExplorer or DriveExplorer Lite to access parameters in

the WIM, connected drive, and any connected peripherals. Then

select Explore > Configure Communication. The Configure

Communication screen (Figure 3.24

) will appear.

Figure 3.24 DriveExplorer/DriveExplorer Lite Configure Communication

Screen

6. Select the same COM port established by the Bluetooth wireless

technology enabled computer (noted in Step 4). For this example,

COM8 is used. There is no need to set the baud rate or change any

other settings. Then click OK.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 99 100

Sin comentarios

Rockwell Automation 22-WIM-N4S Manual de usuario Pagina 33