Rockwell Automation 22-WIM-N4S Manual de usuario descargar pdf (Pagina 62)

C-4 Wireless Flash Updating DSI Peripherals

5. Establish wireless communication between the WIM and Pocket PC.

For this procedure, refer to Using Pocket DriveExplorer for Pocket

PC on page 3-2.

6. With the StatusMonitor screen (Figure C.5) for the drive displayed,

select Port > and then the appropriate port number (for this example,

Port 1) to display the StatusMonitor screen (Figure C.6

) for the

peripheral device being flashed (for this example, the 22-COMM-D).

7. Select Tasks > Flash Update to open the DeviceFlash screen

(Figure C.7

). In the Available Updates list, select the appropriate

firmware version (for this example, 1.007.01 Full). Then tap Next ->

to continue. The DeviceFlash update warning screen (Figure C.8)

appears.

Figure C.5 Port Selection Screen

Figure C.6 StatusMonitor Screen for

22-COMM-D

Figure C.7 DeviceFlash Screen

Figure C.8 DeviceFlash Update

Warning Screen

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 99 100

Sin comentarios

Rockwell Automation 22-WIM-N4S Manual de usuario Pagina 62