Rockwell-automation 160 RSI SERIAL COMM MODULE Manual de usuario descargar pdf (Pagina 27)

Parameter Descriptions 6–3

130 30 Read [DIP Switches]

Displays the current DIP switch settings.

0 to 0xF

0 to 15

0000

131 31 Read [Actual Speed]

Returns speed feedback from the drive. This is the actual drive speed

scaled from 0 to 32767, where 0 = 0 Hz and 32767 = P33 - [Maximum

Frequency].

0 to 32767 0

132 32 Read [Logic Status]

Returns logic status (N41:0). Refer to page 5–3 for data format.

0 to 65535 0

133 33 Read/Write [Logic Mask]

This parameter determines the source of the drive control logic.

A value of “1” corresponds to terminal block control, and any drive input

mode (P46 - [Input Mode]) value

except “2” or “6.”

A value of “2” corresponds to RS1 Module logic control. The input mode

value is “2” or “6.”

If the Logic Mask value is changed from “1” to “2,” the terminal block logic

control is masked out by the RS1 Module. The module does this by

changing the Input Mode to the last previously active network mode, “2” or

“6” (if a network mode has not been active since drive power was applied,

it is set to “2”).

If the Logic Mask value is changed from “2” to “1,” the RS1 logic control is

masked out by the RS1 Module. The module does this by changing the

Input Mode to the last previously active non-network mode (if a non-

network mode has not been active since drive power was applied, it is set

to “0”).

IMPORTANT: Power must be cycled or P56-[Reset Functions] must be

set to “2” for this change to take affect.

1 to 2 1

Parameter Number

Access [Parameter Name] and Description

Min./Max.

Values Default

Drive

(N10:, N30:)

RS1

(N13:, N33:)

Bit

Description Switch3210

0 0 9600 (Default) SW1,

SW2

0 1 2400

1 0 1200

1 1 EPROM Mode

0 DF1 Point-to-Point (Default) SW3

1 DF1 Multi-Drop

BCC (Default) SW4

CRC

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 49 50

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 160 RSI SERIAL COMM MODULE Manual de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 160 RSI SERIAL COMM MODULE