Rockwell-automation 160 RSI SERIAL COMM MODULE Manual de usuario Pagina 45
- Pagina / 50
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Appendix
B
RS1 Module Compatibility
The 160-RS1 Module has been tested and found to be compatible
with the following Allen-Bradley products:
• MicroLogix 1000
Protocol Point-to-Point
PCCC Command 0xA1 Protected Type Logical Read with 2 Address Fields
0xA9 Protected Type Logical Write with 2 Address Fields
Hand Shaking None
Cable
See Chapter 3 for details
Versions Series D, FRN 1.0 or later
• SLC 500
Protocol Point-to-Point/Multi-Drop Master
PCCC Command 0xA2 Protected Type Logical Read with 3 Address Fields
0xAA Protected Type Logical Write with 3 Address Fields
Hand Shaking None
Cable 9 Pin - 9 Pin (
see Chapter 3 for details)
Versions Series B, FRN 7 (OS 4.01) or later
• 1761-NET-AIC+
Protocol Multi-Drop
PCCC Command All
(see Chapter 5 for details)
Hand Shaking None
Cable 9 Pin - 9 Pin
Versions Series A
• PLC-5 Enhanced
Protocol Point-to-Point/Multi-Drop Master
PCCC Command 0x67 Typed Write (Logical ASCII Addressing only)
0x68 Typed Read (Logical ASCII Addressing only)
Hand Shaking None
Cable 9 Pin - 25 Pin (
see Chapter 3 for details)
Versions Series C, FRN E or later
• RSLinx™
Protocol Point-to-Point/Multi-Drop
PCCC Command 0xA1 Protected Type Logical Read with 2 Address Fields
0xA9 Protected Type Logical Write with 2 Address Fields
Hand Shaking None
Cable PC Cable (
see Chapter 3 for details)
Versions 1.7.62.00 or later
• DriveExplorer
Protocol Point-to-Point
PCCC Command 0x67 Typed Write (Logical ASCII Addressing only)
0x68 Typed Read (Logical ASCII Addressing only)
Hand Shaking None
Cable PC Cable (
see Chapter 3 for details)
Versions 1.01.10 or later
• DriveTools32™
Protocol Point-to-Point
PCCC Command 0x67 Typed Write (Logical ASCII Addressing only)
0x68 Typed Read (Logical ASCII Addressing only)
Hand Shaking None
Cable PC Cable (
see Chapter 3 for details)
Versions 2.01 or later
- User Manual 1
- Important User Information 2
- Table of Contents 3
- Chapter 7 4
- Chapter 8 4
- Chapter 9 4
- Appendix A 4
- Appendix B 4
- Using This Manual 5
- Reference Manuals 6
- Safety Precautions 6
- Product Overview 7
- Configuration DIP Switches 8
- Required Tools and Equipment 9
- Procedures 10
- Installation and Wiring 11
- Module Configuration Switches 12
- Setting the Protocol – SW3 13
- Module Installation/Removal 14
- Removing the RS1 Module 15
- Wiring the Connector 16
- - continued 17
- Connecting the Communication 18
- Cable to the Module 18
- Modes of Operation 19
- RS1 Data Table Interface 21
- Refer to table on next page 22
- Data is formatted as follows: 23
- 5–4 RS1 Data Table Interface 24
- Parameter Descriptions 25
- (N10:, N30:) 26
- (N13:, N33:) 26
- End of Chapter 6 28
- Using the RS1 Module with 29
- DriveExplorer™ Software 29
- Setting Baud Rates and 30
- Configuring the 30
- Communications Port 30
- Monitoring and Editing 30
- Parameters 30
- Uploading Editable Parameters 31
- Downloading Parameters 31
- End of Chapter 7 32
- Using the RS1 Module with a 33
- Programmable Controller 33
- Program the Ladder 35
- Reading and Writing 36
- Program the Ladder for 37
- Parameter Reads and Writes 37
- Figure 8.4 38
- Troubleshooting 39
- READY LED 40
- COMM LED 40
- FAULT LED 40
- RS1/DF1 Error Codes 41
- End of Chapter 9 42
- Specifications 43
- End of Appendix A 44
- RS1 Module Compatibility 45
- End of Appendix B 46
- I–2 Index 48
Relacionado con productos y manuales para Equipo Rockwell-automation 160 RSI SERIAL COMM MODULE
(4 paginas)
Equipo Rockwell-automation 140U-M-NH12_NH21 NFPA 79 Internal Rotary Operating Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 193-EIMD60 E3 Overload Relay AC Input Interface Mo Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 140 Undervoltage / Shunt Trip Devices for 140-CMN Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 25B PowerFlex 520-Series Replacement Power Termina Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 825-MDN Smart Motor Manager DeviceNet Communicatio Manual de usuario
(70 paginas)
(70 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.110 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales