Rockwell-automation 160 RSI SERIAL COMM MODULE Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Chapter
1
Product Overview
This chapter contains the following information:
The physical layout of the module.
Location of configuration switches.
Overview and components.
Module Description
The RS1 Module is an optional interface device designed to provide a
direct, digital link between RS-232 devices and the 160 Drive. The
module connects to the drive through the expansion/keypad port on
the front of the drive. Refer to the figures 1.1 and 1.2 for general
layout of the module and Chapters 4 or 9 for details on the LED
indicators.
Figure 1.1
Module Front View
FAULT
READY
RS232
Serial Comm
COMM
CAT
160-RS1
SER
MADE IN U.S.A.
9 Pin, Female D-Shell Connector
Refer to Chapter 3 for Details
Module Installation Latch
Status LEDs
Refer to Chapters 4 & 9
for Further Information
Nameplate
Provides Firmware Version
and Series Letter
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 49 50

Comentarios a estos manuales

Sin comentarios