Rockwell-automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-P Manual de usuario descargar pdf (Pagina 46)

38 Rockwell Automation Publication 1732E-UM005A-EN-E - July 2012

Chapter 3 Configure Your Analog Input and Output Modules with RSLogix 5000 Software

Fault/Program Action Tab

1. To configure the Fault/Program Action tab, set the following parameters:

Fault/Program Action tab

Field What to do Description

Channel Select a push button to

correspond to a channel

(0…3).

Refers to the channel being configured.

Fault Mode Select from a dropdown

list:

Allows the user to select any of the following

output behavior for each channel when in Fault

mode:

• Go to Low Clamp (default)

• Hold Last State

• Go to High Clamp

• Use Fault Value

Fault Value Specify a value. Activates when Use Fault Value is selected as Fault

Mode. The user needs to enter a value for the

output to transition to when there is a

communication fault.

Program Mode Select from a dropdown

list:

Allows the user to select any of the following

output behavior for each channel when in Program

mode:

• Go to Low Clamp (default)

• Hold Last State

• Go to High Clamp

• Use Program Value

Program Value Specify a value. Activates when Use Program Value is selected as

Program Mode. The user needs to enter a value for

the output to transition to when in Program mode.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 95 96

Sin comentarios

Rockwell-automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-P Manual de usuario Pagina 46