Rockwell-automation 1738-AENTR Armorpoint 2 Port Enet Adapter Manual de usuario descargar pdf (Pagina 12)

12 ArmorPoint I/O 2-Port EtherNet/IP Adapter, Series A

Publication

1738-IN028B-EN-E - February 2010

Red Unrecoverable fault has occurred:

- self-test failure (Flash checksum

failure at power up, ramtest failure

or EEPROM checksum failure at cycle

power).

- firmware fatal error.

Replace device.

Network Activity

Status Description Recommended action

Off No link established with Port 1 or

Port 2.

Verify network cabling, and

correct, as needed.

Green - Link established with Port 1 and/or

Port 2 at 100 Mbps.

- Link established with Port 1 and

Port 2. One port at 100 Mbps and one

port at 10 Mbps.

None.

Flashing

green

- Transmit or receive activity present

on Port 1 and/or Port 2 at 100 Mbps.

- Transmit or receive activity present

on Port 1 and/or Port 2. One port at

100 Mbps and one port at 10 Mbps.

None.

Yellow Link established with Port 1 and/or

Port 2 at 10 Mbps.

None.

Flashing

yellow

Transmit or receive activity present

Port 1 and/or Port 2 at 10 Mbps.

None.

Adapter Status (Continued)

Status Description Recommended action

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Rockwell-automation 1738-AENTR Armorpoint 2 Port Enet Adapter Manual de usuario Pagina 12