Rockwell-automation 1756-SYNCH ControlLogix SynchLink Module User Manu Manual de usuario descargar pdf (Pagina 49)

1 Publication 1756-UM521C-EN-P - July 2004

Chapter

Installing the SynchLink Module

This chapter describes how to install the ControlLogix

SynchLink module.

Noting the Power

Requirements

This module receives power from the 1756 chassis power supply and requires

2 sources of power from the backplane:

• 1200mA at 5.1V dc

• 3mA at 24V dc

Add this current/power value (6.19W) to the requirements of all other

modules in the chassis to prevent overloading the power supply.

Table 4.1

For information on: See page:

Noting the Power Requirements 4-1

Installing the Module 4-2

Connecting the Fiber Optic Cable 4-3

Removing the Module 4-4

IMPORTANT

Before you install and use your module you should have

already installed and grounded a 1756 chassis and power

supply.

To install these products, refer to the products’ user

documentation, as listed in Table Preface.3 on

page Preface-5.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 145 146

Sin comentarios

Rockwell-automation 1756-SYNCH ControlLogix SynchLink Module User Manu Manual de usuario Pagina 49