
Publication 1756-UM521C-EN-P - July 2004
5-10 Configuring the SynchLink Module
3. Make the necessary changes.
After you make your configuration changes, you must download the
new configuration, as described on page 5-8.
Chapter Summary and
What’s Next
In this chapter, you read about the general configuration
process. For specific configuration examples, see:
• Appendix B - Star Configuration with Remote Axis Data
• Appendix C - Daisy Chain Configuration
• Appendix D - Ring Configuration
For information on Troubleshooting the SynchLink Module, see Chapter 6.
A. In this example, the
Connection tab was
accessed to change the RPI.
B. Click on OK to make
the changes..
Comentarios a estos manuales