Rockwell-automation 1756-SYNCH ControlLogix SynchLink Module User Manu Manual de usuario descargar pdf (Pagina 92)

Publication 1756-UM521C-EN-P - July 2004

B-16 Configuring the Star Configuration

Create Axis Data Tags

You must create axis data tags for the controller in this chassis to consume.

The axis data is originally produced in the Time Master chassis and broadcast

to SynchLink modules in other chassis over the fiber optic cable. SynchLink

modules in each Time Slave chassis then consume the data from the cable and

produce it in the local chassis. The owner controller in their local chassis

consumes the data from the local SynchLink module.

Follow these steps to create axis data tags in the consuming chassis:

1. Create a New Tag for Axis 1.

A. Select Controller Tags.

B. Right-click to display

the menu.

C. Select New Tag.

A. Name the new tag.

B. Change the Tag Type

to Consumed.

C. Use the pull-down menu

to change the Producer to

the SynchLink module in

the local chassis.

D. Type in the Remote Tag

Name. This name must

either be Axis0 or Axis1.

IMPORTANT: If you use any

other Remote Tag Name

(other than Axis0 or Axis1)

the remote axis data will

NOT be consumed.

E. Change the Data Type to Axis.

F. Click on OK to create the new tag.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 145 146

Sin comentarios

Rockwell-automation 1756-SYNCH ControlLogix SynchLink Module User Manu Manual de usuario Pagina 92