Rockwell-automation 1761-NET-DNI DeviceNet Interface (DNI) Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Publication 1761-UM005B-EN-P - October 2006
Installation and Wiring 25
Follow these steps to remove the DNI from the DIN rail.
1. Place a screwdriver in the DIN rail latch at the bottom of the
unit.
2. Holding the unit, pry downward on the latch until the unit is
released from the DIN rail.
Panel Mounting
Follow these steps to mount the DNI on a panel.
1. Remove the mounting template from Appendix A of this
document.
2. Secure the template to the mounting surface.
3. Drill holes through the template.
4. Remove the mounting template.
5. Mount the unit.
Side
View
DIN
Rail
Latch
Side
View
DIN Rail
Mounting Template
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 99 100

Comentarios a estos manuales

Sin comentarios