
61Publication 1769-UM009E-EN-P - August 2009 61
Chapter
5
Manually Configure the DeviceNet Network
Introduction
This chapter describes how to configure the DeviceNet network using RSLinx
and RSNetWorx for DeviceNet software. This table describes what this
chapter contains and where to find specific information.
Software Versions
This table lists the software and revision level required to operate with the
1769-SDN scanner module.
You will also need one of the following interfaces to use your computer to
communicate with the DeviceNet network:
• 1770-KFD RS-232 DeviceNet adapter
• 1784-PCD or 1784-PCID DeviceNet interface card
If your RSNetWorx for DeviceNet software does not include the required
Electronic Data Sheet (EDS) file, go to
http://www.ab.com/networks/eds
.
Register the new EDS file using the EDS Wizard in RSNetWorx for
DeviceNet software. Access the wizard from the Tools menu.
Topic Page
Software Versions 61
Install the Software 62
Use RSLinx Software to Configure Your
DeviceNet Driver
62
Use RSNetWorx for DeviceNet Software to
Configure the 1769-SDN Scanlist
64
Function Software Version
Communication RSLinx 2.30 or later
DeviceNet configuration RSNetWorx for DeviceNet 3.00 or later
Ladder logic programming software RSLogix 500 5.00.10 or later
RSLogix 5000 8.02 or later
Comentarios a estos manuales