Rockwell-automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL Manual de usuario descargar pdf (Pagina 104)

5–17Downloading/Uploading Message Files

Publication 2706-6.2

You can send your computer’s system time and date to the DL40.

When you select Send Clock to DL40 (RS-232/RS-485), the Send

Clock to DL40 DL40 menu will appear. Move the cursor to DL40

Port and press [O]. Select RS-232 or RS-485 from the window and

press [↵ ]. A message flashes briefly to indicate that the Offline

Programming Software is saving the setup file.

Send Clock To DL40 screen

To configure your computer’s communication port, select Configure

Port, then press [↵ ]. Select COM1 or COM2, press [↵ ], specify

your computer’s address (if using RS-485), and select a baud rate in

the Configure Port window.

Move the cursor to the line containing the words Send Clock and

press [↵ ]. The Send Clock confirmation appears. Select Yes to

begin, or No or Quit to cancel the download and return to the Send

Clock to DL40 menu.

If using RS-485, the Address Selections/Address Picks window

opens. All message addresses in the selected file will appear in the

Address Selections column. Use the up and down arrow keys to

highlight an address, then press [↵ ] to move the address to the

Address Picks column. After you have moved all the addresses to be

updated with new time and date into the Address Picks column, press

[F10].

To select a block of addresses, move the cursor to the first address on

the block and press [CTRL][B] to mark the beginning of the block.

Then move the cursor to the last address in the block and press [↵ ].

The entire block is moved to the opposite column.

Sending the Time and Date to

a DL40 Via RS-232 or RS-485

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 148 149

Sin comentarios

Rockwell-automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL Manual de usuario Pagina 104