Rockwell-automation 2707-NP DTAM Programming Software Manual de usuario descargar pdf (Pagina 136)

Chapter 16

DTAM Micro

Function Key Builder

16–4

You can link function keys [F1] through [F8] to individual screens (except

alarm screens). You can only link the function keys of the DTAM Micro,

this procedure does not apply to the DTAM Plus.

To link screens to function keys:

1. At the Opening menu select Edit Program File and enter a file name.

The Edit File - Option Selection menu is displayed.

2. Select Function Key Builder.

The Function Key Builder screen appears.

3. Use the arrow keys to highlight the function key you want to assign.

4. Enter a screen number for the function key and press [Return]. If you

want to see the screen you are assigning, press [F1] and [F2].

You are prompted if you want the key to auto return.

5. Enter [Y] for Auto Return Mode or [N] for Continue Mode and press

[Return].

6. Assign the remaining function keys. If you want to assign bit write mode

functions, refer to the next section.

7. Press [F9] to save the screen.

Linking Screens to

Function Keys

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 183 184

Sin comentarios

Rockwell-automation 2707-NP DTAM Programming Software Manual de usuario Pagina 136