Rockwell-automation 4100 ALEC AXIS LINK ENCODER CONVERTER Manual de usuario descargar pdf (Pagina 43)

Publication 4100-5.3 - June 1999

Setup

10. Download the diagram.

Once AxisLink is enabled, the AL LED should be green. If the AL LED

is red, reset the ALEC by pressing the Reset button on the front panel

of the ALEC box. If the AL LED stays red after re-setting, check the

cabling and termination to make sure all of the wiring is done

properly. If it remains red, call Allen-Bradley Technical Support.

For more information on AxisLink and how to use it with the ALEC

see the “Using AxisLink” chapter of the GML Commander Reference

Manual (publication 4100-5.3).

IMPORTANT

AxisLink is not enabled until the diagram is downloaded.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 60 61

Sin comentarios

Rockwell-automation 4100 ALEC AXIS LINK ENCODER CONVERTER Manual de usuario Pagina 43