Rockwell-automation 6189V-xxxx Non-display Industrial Computers User M Manual de usuario descargar pdf (Pagina 26)

26 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014

Chapter 2 Installation

Mount the 1450R Computer in a Rack Cabinet

You can install the 1450R computer in a rack cabinet that does the following:

• Conforms to EIA standards for equipment with 483 mm (19 in.) wide

panels

• Accommodates the 4U height and depth of the computer

• Provides rear clearance for cables and airflow

A rack cabinet with a depth of 610 mm (24 in.) is sufficient.

Support the computer with rack slides or by fastening it to a shelf. The four

flanges of the computer secure the computer horizontally only to the front

mounting rails of the rack cabinet.

Follow these steps to mount the 1450R computer.

1. Verify that the mounting location provides adequate space for cables and

airflow.

See Mounting Clearance Requirements

on page 22 for recommended

allowances.

2. Attach the supplied rack handles to the computer.

Torque the screws to 1.3 N•m (12.1 lb•in).

3. See Install Rack Slides (1450R Computer)

on page 102 on how to install

rack slides to the rack cabinet and the 1450R computer.

IMPORTANT

Rack slides are not supplied with the computer and must be ordered separately.

See Mounting Hardware on page 22 for the catalog number necessary for

ordering.

See Install Rack Slides (1450R Computer)

on page 102 if you have purchased

the rack slides.

TIP

For ease of installation, use two or more people to install the computer.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 107 108

Comentarios a estos manuales

Sin comentarios