Rockwell-automation 6189V-xxxx Non-display Industrial Computers User M Manual de usuario descargar pdf (Pagina 60)

60 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014

Chapter 5 UEFI Set-up Utility

SATA Configuration (for computers with Windows 8.1, 7, or XP operating systems)

Parameter

(1)

(1) See page 54 for an explanation of common buttons near the bottom of screen.

Description

SATA Mode Select an operation mode for the onboard SATA controller.

Options: Disabled, IDE Mode, AHCI Mode (default), or RAID Mode

(2)

(2) Applies only to computers that ship with Windows Server operating systems. For computers that ship with two HDDs but no

operating system, the HDDs are in AHCI mode instead of RAID and each drive acts independently.

SATA Port (0, 1, 2, 4) Indicates the SATA HDD connected to the SATA connector.

Hot Plug Enables or disables hot plug support for the SATA port.

Options: Enabled (default) or Disabled

IMPORTANT: Make sure all writes to HDD are complete before your remove the

HDD from the system to avoid risk of data corruption.

External SATA Port Enables or disables eSATA port.

Options: Enabled (default) or Disabled

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 107 108

Comentarios a estos manuales

Sin comentarios