Rockwell-automation 6189V-xxxx Non-display Industrial Computers User M Manual de usuario descargar pdf (Pagina 70)

70 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014

Chapter 5 UEFI Set-up Utility

Boot

Parameter

(1)

(1) See page 54 for an explanation of common buttons near the bottom of screen.

Description

Bootup NumLock State Enables or disables the Num Lock key on boot.

Option: On (default), Off

Quiet Boot Enables or disables Quiet Boot option.

Option: Enabled or Disabled (default)

IMPORTANT: When enabled, this option hides the POST screen messages at

computer startup.

Boot Priority List Change the boot order. By default, these devices are the boot priority:

1. USB key

2. CD-ROM

3. HDD

4. PXE

5. UEFI Shell

6. PCI/PCIe RAID/SCSI/SAS card

Follow instructions in the dialog box to change the boot order, and to enable or

disable options.

USB Boot Priorities

(2)

(2) This data field is visible only when a USB device is connected to the computer during startup.

Change the USB boot order through a dialog box.

Follow instructions to change the boot order, and to enable or disable options.

CD-DVD ROM Boot Priorities

(3)

(3) This data field is visible only on computers with CD-DVD ROM devices.

Change the CD-DVD ROM boot order through a dialog box.

Follow instructions to change the boot order, and to enable or disable options.

Hard-Drive Boot Priorities Change the hard drive boot order through a dialog box.

Follow instructions to change the boot order, and to enable or disable options.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 107 108

Comentarios a estos manuales

Sin comentarios