Rockwell-automation 6189V-xxxx Non-display Industrial Computers User M Manual de usuario descargar pdf (Pagina 32)

32 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014

Chapter 3 Operation

Start the Computer

Follow these steps to start the computer.

1.

Make sure any connected components with separate power supplies (such

as an external display) are turned on first.

2.

Make sure all necessary peripheral devices are connected to the corresponding

I/O ports on the computer.

3. If you have a1450R computer and the front

door is locked, complete the following steps:

a. Unlock the front door with the provided

key.

b. Open the door to access the power

switch.

4. Plug the AC power cable into the power

input on the computer and into a power

source or wall outlet.

5. Press the power switch.

See Hardware Features

on page 13 for the power switch location.

The computer performs certain actions when it is started or reset. See Restart the

Computer on page 33.

If your computer does not start or you notice other anomalies, refer to the

Troubleshooting

on page 84.

IMPORTANT

The following steps apply to when you must manually start the computer. See

Connect Power

on page 29 for when power is applied to the computer for the

first time.

SHOCK HAZARD:

Connect the AC power cord to a power source with an

earth ground. Failure to follow this warning can result in electrical shock.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 107 108

Comentarios a estos manuales

Sin comentarios