Rockwell-automation 6189V-xxxx Non-display Industrial Computers User M Manual de usuario descargar pdf (Pagina 66)

66 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014

Chapter 5 UEFI Set-up Utility

Table 2 - Serial Port 1 Configuration

Table 3 - Serial Port 2 Configuration

Table 4 - Parallel Port Configuration

Parameter Description

Serial Port 1 Enables or disables the serial (COM1) port.

Options: Enabled (default) or Disabled

Device Settings Displays the Base I/O address and IRQ setting of serial port 1.

Change Settings Select an optimal setting for the super I/O device.

Options: Auto (default), I/O=3F8h; IRQ=4, I/O=2F8h; IRQ=4, I/O=3E8h; IRQ=4,

I/O=2E8h; IRQ=4

Parameter Description

Serial Port 2 Enables or disables the serial (COM2) port.

Options: Enabled (default) or Disabled

Device Settings Displays the Base I/O address and IRQ setting of serial port 2.

Change Settings Select an optimal setting for the super I/O device.

Options: Auto (default), I/O=2F8h; IRQ=3, I/O=3F8h; IRQ=3, I/O=3E8h; IRQ=3,

I/O=2E8h; IRQ=3

Parameter Description

Parallel Port Enable or disables the parallel (LPT/LPTE) port.

Options: Enabled (default) or Disabled

Device Settings Displays the Base I/O address and IRQ setting of the parallel port.

Change Settings Select an optimal setting for the super I/O device.

Options: Auto (default), I/O=378h; IRQ=5, I/O=278h; IRQ=5, I/O=3BCh; IRQ=5

Device Mode Select a printer mode.

Options: Standard Parallel Port Mode (default), EPP Mode, ECP Mode, EPP Mode,

and ECP Mode

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 107 108

Comentarios a estos manuales

Sin comentarios