Rockwell-automation 900 Temperature Controller Communications Function Manual de usuario descargar pdf (Pagina 14)

Publication 900-UM004D-EN-E - July 2010

1-6 About Communications Methods

Communications Parameter

Setup

Before you carry out communications with the 900-TCx, set up

communications unit number, baud rate and other parameters by carrying out

the following procedure. For details of operations other than communications

parameter setup, refer to the applicable 900-TCx User Manual.

Communications Parameter Setup

1. Hold down the key for at least three seconds to move from the

Operation function group to the Initial Setting function group.

2. Press the key for less than one second to move from the Initial

Setting V to the Communications Setting function group.

3. Select the parameters as shown below by pressing the

M key.

4. Use the

D or U keys to change the parameter set values.

Note: Displayed only when the Protocol Selection is CWF (900-TC)

Table 1.3 900-TCx User Manuals

Temperature Controller Model Number User Manual

900-TC8 900-UM007*

900-TC16 900-UM007*

900-TC32 900-UM007*

Protocol selection

Communications unit

number

Communications

baud rate

Communications data

length (See note.)

Communications stop

bits (See note.)

Communications

parity

Send data wait time

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 102 103

Sin comentarios

Rockwell-automation 900 Temperature Controller Communications Function Manual de usuario Pagina 14