Rockwell-automation MD60 User Manual Version 3.0 Manual de usuario descargar pdf (Pagina 80)

9-30 MD60 AC Drive User Manual

The status of the control terminal block control inputs.

Important: Actual command may come from a source other than

the control terminal block.

The status of the control terminal block digital inputs.

d013 Control Input Status

Range: 0 = Input Present

1 = Input Not Present

See figure 9.12

Default: Read Only

See also: N/A

1

The stop input must be present to start the drive. When this

bit is a 1, the drive can be started. When this bit is a 0, the

drive will stop.

Figure 9.12 – Control Input Status (d013) Bit Definitions

Start / Run FWD Input (I/O Terminal 02) Digit 0

Direction / Run REV Input (I/O Terminal 03) Digit 1

Stop Input

1

(Control Terminal 01) Digit 2

Reserved Digit 3

d014 Digital Input Status

Range: 0 = Input Not Present

1 = Input Present

See figure 9.13.

Default: Read Only

See also: A051, A052

Figure 9.13 – Digital Input Status (d014) Bit Definitions

Digital In1 Sel (I/O Terminal 05) Digit 0

Digital In2 Sel (I/O Terminal 06) Digit 1

Reserved Digit 2

Reserved Digit 3

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 135 136

Comentarios a estos manuales

Sin comentarios