Rockwell-automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE In Manual de usuario descargar pdf (Pagina 132)

122 Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014

Appendix D Connect to Networks via Ethernet Interface

Configure Using

RSLogix 5000 Software

Refer to the online documentation provided with your programming software or

see Configure the Module for Your EtherNet/IP Network on page 23

and

Configure the Module Using RSLogix 5000 software on page 33

Configure Using Web

Server

The 1732E EtherNet/IP ArmorBlock Supporting Sequence of Events module

includes an embedded web server which allows viewing of module information,

TCP/IP configuration, and diagnostic information.

For more information on ArmorBlock module embedded web server capability,

refer to Appendix E on page 123

Subnet Mask The ArmorBlock module subnet mask (in network byte order). The Subnet Mask is used to

interpret IP addresses when the internet is divided into subnets. A Subnet Mask of all zeros

indicates that no subnet mask has been configured.

In this case, the controller assumes a Subnet Mask of 255.255.255.0.

0 (undefined) read/write

Gateway Address The address of a gateway (in network byte order) that provides connection to another IP

network. A Gateway Address of all zeros indicates that no gateway has been configured.

0 (undefined) read/write

Host name The Host Name is a unique name that identifies a device on a network. It must start with a

letter, end with a letter or digit, and have as interior characters only letters, digits or hyphens.

Maximum length is 64 characters. It must have an even number of characters.

NULL

(undefined)

read/write

Default Domain

Name

The default domain name can have the following formats:

’a.b.c’, ’a.b’ or ’a’, where a, b, c must start with a letter, end with a letter or digit, and have as

interior characters only letters, digits or hyphens. Maximum length is 48 characters.

NULL

(undefined)

read/write

Primary Name

Server

This is the IP address of the computer acting as the local Ethernet network Primary Domain

Name System (DNS) server.

0 (undefined) read/write

Secondary Name

Server

This is the IP address of the computer acting as the local Ethernet network Secondary Domain

Name System (DNS) server.

0 (undefined) read/write

DHCP Enable When DHCP is enabled, a DHCP server automatically assigns network related parameters to

the ArmorBlock module when it logs on to a TCP/IP network. There must be a DHCP server on

the network capable of allocating network addresses and configuring parameters to newly

attached device. When DHCP is disabled, the ArmorBlock module uses the locally configured

network related parameters (IP Address, Subnet Mask, Gateway Address, and so on).

1 (enabled) read/write

Auto Negotiate and

Port Setting

When Auto Negotiate is disabled (unchecked), the Ethernet speed/duplex is forced to either 10

Mbps/Half-duplex, 10 Mbps/Full-duplex, 100 Mbps/Half-duplex, or 100 Mbps/Full-duplex, as

selected in the Port Setting field.

When Auto Negotiate is enabled (checked), the ArmorBlock module will automatically

negotiate the link speed and duplex with the module it is connected to.

Auto Negotiate

enabled

read/write

Configuration Parameters

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 145 146

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE In Manual de usuario Pagina 132

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE In