Rockwell-automation 1734-IT2I Thermocouple and RTD Input Module User M Manual de usuario descargar pdf (Pagina 64)

Publication 1734-UM004F-EN-E - December 2012

54 Troubleshoot the Module

Chapter Summary

This chapter helped you to interpret the status indicators on the modules.

Refer to the Appendix to learn how to configure the POINT I/O

Thermocouple and RTD Modules using the RSLogix 5000 software.

Network status Off Device is not online.

- Device has not completed dup_MAC_id test.

- Device not powered - check module status

indicator.

Flashing green Device is online but has no connections in the

established state.

Green Device online and has connections in the

established state.

Flashing red One or more I/O connections are in timed-out

state.

Red Critical link failure is present with failed

communication device. Device detected error that

prevents it from communicating on the network.

Flashing

red/green

Communication faulted device - the device

detected a network access error and is in

communication faulted state. Device received and

accepted an Identify Communication Faulted

Request - long protocol message.

Channel status Off Module is in CAL mode.

Solid green Normal state is present with channel scanning

inputs.

Flashing green Channel being calibrated.

Solid ged Major channel fault is present.

Flashing ged Channel is at end of range (over or under).

IMPORTANT

This module is not field repairable. Any attempt to open this

module will void the warranty. If repair is necessary, return this

module to the factory.

Indicator Stastus for Module

Status Description

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Sin comentarios

Rockwell-automation 1734-IT2I Thermocouple and RTD Input Module User M Manual de usuario Pagina 64