Rockwell-automation 1746-NI16V SLC 500 Analog Input Modules User Manua Manual de usuario Pagina 18
- Pagina / 120
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Publication 1746-UM001A-US-P
2-4 Quick Start for Experienced Users
5. Configure the system. Reference
Configure your system I/O for the particular slot the 1746-NI16 is in (slot 1 in this example). Enter the module ID
code. The ID code is for Class 1 interface or Class 3 interface. See Chapter 4 for more information on Class 1 and
Class 3 interfaces.
Important:
Not all programming software supports configuration for Class 3 operation.
•
Advanced Programming Software (APS) supports Class 3 configuration, after entering the ID code.
•
SLC 500 A.I. Series Programming Software supports Class 3 configuration, after entering the ID code.
•
RSLogix 500, version 1.30 or later, supports Class 3 configuration, after entering the ID code.
•
Earlier versions of RSLogix 500 only supports configuration for Class 1 operation. Contact Rockwell
Software for information on upgrading your software.
Chapter 4
(Preliminary
Operating
Considerations)
Appendix C
(Converting from
1746-NI4 or
1746-NI8 to
1746-NI16)
Device’s user
manual.
6. Determine the operating parameters. Reference
1115 3 214 13 12 10 9 8 76 54 10
01 0 0010 00 0 00 00 00
Bit Number
Channel 0
• Class 1, Data or Status Configuration
• Input Type: ± 10 V dc
• Data Format: Engineering Units
• Filter Frequency: 20 Hz
• Channel Enable: Enabled
• Class 1 Handshaking
Chapter 4
(Preliminary Opening
Considerations)
Chapter 5
(Channel
Configuration,
Data and Status)
Appendix B
(1746-NI16
Configuration
Worksheet)
Determine the operating parameters for channel 0. This example shows the channel 0 configuration word. The
module is in slot 1. The default configuration word is all zeros.
• Calibration
• Not Used
- SLC 500™ Analog 1
- Input Modules 1
- Important User Information 2
- Table of Contents 3
- Table of Contents ii 4
- Table of Contents iii 5
- Table of Contents iv 6
- Who Should Use this 7
- Purpose of this Manual 7
- Contents of this Manual 8
- Related Documentation 9
- Common Techniques Used 10
- Allen-Bradley Support 10
- Overview 11
- Hardware Features 12
- System Overview 13
- Module Operation 14
- Module Calibration 14
- Required Tools and 15
- Equipment 15
- Procedures 16
- (Installation and 17
- 01 0 0010 00 0 00 00 00 18
- (Application Examples) 20
- 1112131415 910 8 67450123 21
- (Channel Configuration 21
- Data and Status) 21
- 12 415 14 13 11 10 9 87 65 32 22
- 0 0111 10 0 00 00 00 22
- Installation and Wiring 23
- Environnements dangereux 24
- Electrostatic Damage 24
- 1746-NI16 Power 25
- Requirements 25
- Module Location in Chassis 25
- Fixed Chassis Example 27
- Compliance to European 28
- Union Directives 28
- Module Installation and 29
- Module Installation Procedure 30
- Module Removal Procedure 30
- Terminal Wiring 31
- 1746-NI16V 32
- 1746-NI16I 33
- Wiring Guidelines 34
- Input Devices 35
- Module ID Code 37
- Class 1 and Class 3 38
- Interface 38
- Module Addressing 39
- Class 1 Input Words - Data 41
- Class 3 Input Words - Data 41
- Module Update Time 42
- Channel Sample Order 43
- Channel Filter Frequency 45
- Selection 45
- Aliasing Frequency 46
- Noise Rejection 46
- Response to Slot Disabling 47
- Channel Configuration 49
- Output Image Channel 50
- Configuration Procedure 50
- Channel Configuration Word 51
- Low Calibration 53
- High Calibration 53
- Unused Bit (Bit 3) 54
- Class 1 Handshaking (Bit 2) 55
- Input Image - Channel Data 56
- Scaling the Channel Data 58
- Scaling Examples 60
- Formulas 60
- Scaled-for-PID to Real Units 62
- Channel Status Checking 64
- Class 1 Status Word 66
- Class 3 Status Word 67
- Input Word Bit Definitions 68
- Class 1 Handshaking (Bit 6) 69
- Input Type (Bits 3 and 2) 70
- Module operation vs 71
- Channel Operation 71
- Power-Up Diagnostics 71
- Channel Diagnostics 72
- LED Indicators 73
- Module Status LED 74
- All LEDs 74
- Error Codes 75
- Troubleshooting Flowchart 76
- Replacement parts 77
- Contacting Allen-Bradley 77
- Application Examples 79
- Ladder Files 81
- File 2 (Continued) 82
- File 3 (Continued) 87
- Class 3 Example 96
- Ladder File 2 97
- Data File N7 99
- Publication 1746-UM001A-US-P 100
- Specifications 101
- Physical Specifications 102
- Environmental 102
- Input Specifications 103
- A-4 Specifications 104
- Configuration Worksheet 105
- Appendix 107
- Calibration 109
- D-2 Calibration 110
- Glossary 111
- Glossary 2 112
- Glossary 3 113
- Glossary 4 114
- Numerics 115
- 2 Index 116
- Index 3 117
- 4 Index 118
- Back Cover 119
Relacionado con productos y manuales para Equipo Rockwell-automation 1746-NI16V SLC 500 Analog Input Modules User Manua
Equipo Rockwell-automation 1738-OE2VM12 ArmorPoint 24V dc Analog Output Modul Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1771-SDN DeviceNet Scanner Module Installation Ins Manual de usuario
(40 paginas)
(40 paginas)
Equipo Rockwell-automation 1771-OBD Series C INSTL INSTR DC(10-60V) OUTPUT Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1734-FPD, Series B POINT I/O Field Potential Distr Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1771-IND series C INSTL INSTR AC/DC INPUT MODULE Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 1734D-IB8XOB8 POINT I/O Installation Instructions Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 1771-N SERIES High Resolution Analog Module User M Manual de usuario
(188 paginas)
(188 paginas)
Equipo Rockwell-automation 1792D-8BIO8E ArmorBlock MaXum 8 Input/8 Output Mod Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1792D-16BT0LP INSTL INSTR ARMORBLOCK LP2 16 Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation Logix5000 Controllers Major, Minor, and I/O Faults Manual de usuario
(53 paginas)
(53 paginas)
Equipo Rockwell-automation 1756-HIST2G FactoryTalk Historian ME 2.2 Installat Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 1769-IQ6XOW4 Compact Combination 24V dc Sink/Sourc Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1746-NO8V SLC 500 8-Point Analog Output Module/ Us Manual de usuario
(74 paginas)
(74 paginas)
Equipo Rockwell-automation 1771-OD16 AC (120V) ISO Output Installation Instru Manual de usuario
(12 paginas)
(12 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales