Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manual de usuario descargar pdf (Pagina 29)

29Publication IASIMP-QS010B-EN-P - October 2009 29

Chapter

Prepare the Computer, Network, and Controller

In this chapter, you configure network communication on your computer and install the

necessary programming and configuration software.

In this chapter, you also assign IP addresses to devices on an EtherNet/IP network. For more

information about using the packaged controllers on an EtherNet/IP network, see Chapter 2

of the user manual, titled Network Communication

(page 157).

Before You Begin

• Verify that your computer meets the software’s system requirements for your edition of

RSLogix 5000 software.

What You Need

• RSLogix 5000 software (see the Preface for version and edition information).

• ControlFlash software (packaged with RSLogix 5000 software).

• RLinx Classic software, version 2.54 or later (packaged with RSLogix 5000 software).

• BOOTP/DHCP server utility

(packaged with RSLogix 5000 software).

• The computer needs a Network Interface Card (NIC) and its associated Windows driver

installed (the NIC and driver are standard on most computers).

• An Ethernet Address (MAC) for each device. You recorded these addresses in the

Network Worksheet

on the back cover.

• A planned IP Address for each device. If you are using an isolated network, determine a

numbering convention for your IP addresses. Record these addresses on the

Network Worksheet

inside the back cover.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 248 249

Sin comentarios

Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manual de usuario Pagina 29