Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manual de usuario descargar pdf (Pagina 42)

42 Publication IASIMP-QS010B-EN-P - October 2009

Chapter 2 Prepare the Computer, Network, and Controller

Assign an IP Address to the Packaged Controller

1769-L23E packaged controllers

In this chapter, you use the BOOTP/DHCP server to assign an IP address to the packaged

controller. You use the BOOTP server that you installed with RSLogix 5000 software.

TIP

Devices on the EtherNet/IP network broadcast requests for IP addresses until the IP addresses have been

assigned.

The procedure in this chapter uses the BOOTP server packaged with RSLogix 5000 programming software

to assign IP addresses, however, any industry-standard BootP server can be used.

1. After you have installed and connected your packaged, launch the BOOTP/DHCP

Server utility.

2. From the Tools menu, choose Network

Settings.

3. Enter the Subnet Mask from the

Network Worksheet

4. Click OK.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 248 249

Sin comentarios

Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manual de usuario Pagina 42