Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manual de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 249
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
Publication IASIMP-QS010B-EN-P - October 2009 79
Add POINT I/O Chapter 4
Set the POINT I/O Chassis Size
1. Right-click the 1734-AENT and
choose Properties.
If the both the chassis sizes match, skip to step 1
on page 80
.
If the numbers do not match, continue with step 3.
3. On the Connection tab, check the Inhibit Module
checkbox and click Apply.
4. Click Yes.
2. Click the Chassis
Size tab.
Set Chassis Size in Module.
6. Click OK at the warning.
The Module chassis size updates.
7. On the Connection Tab, uncheck the Inhibit
Module checkbox and click OK.
8. Click Yes.
You have set the POINT I/O chassis size.
9. Click Save.
5. On the Chassis size tab, click
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 248 249

Comentarios a estos manuales

Sin comentarios