
90 Publication IASIMP-QS010B-EN-P - October 2009
Chapter 5 Add a PowerFlex 40 Drive
Add the Drive to the Project
1. Verify that you are not online with the
packaged controller.
2. Right-click your network port and choose
New Module.
3. Expand Drives.
4. Select the PowerFlex 40-E.
5. Click OK.
6. In the Name box, type
a name for the drive.
7. Enter the IP Address
for your drive.
Use the
Network Worksheet
as a reference.
8. Click Change.
Comentarios a estos manuales