Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Manual de usuario descargar pdf (Pagina 10)

8 Rockwell Automation Publication 1788-UM057B-EN-P - September 2014

Preface

Built-in power conditioners and protection are provided, which helps to

minimize installation space requirements. The H1 segment is divided between

two physical ports (A and B) with individual protection and a supply of 500 mA

per port. See H1 Network Connections on page 14

The basic diagnostics of the linking device and the field devices, is found in the

input assemblies. Advanced configuration is found only through the AOP.

To assist with troubleshooting, a 128 x 128 pixel display provides access to the

status of the linking device. Information available includes network voltages and

currents, internal temperature, and communication quality to each field device.

A built-in web server provides remote access to network and field device data.

Safety Precautions

Read and understand all precautions before using the linking device.

Prevent Electrostatic Discharge

ATTENTION: Prevent Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which can cause internal

damage and affect normal operation. Follow these guidelines when you handle

this equipment

• Touch a grounded object to discharge potential static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component boards.

• Do not touch circuit components inside the equipment.

• Use a static-safe workstation, if available.

• Store the equipment in appropriate static-safe packaging when not in use.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 103 104

Sin comentarios

Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Manual de usuario Pagina 10