Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario descargar pdf (Pagina 39)

Publication 1794-UM061A-EN-P - July 2006

Configuring Modules for Communication on a Remote I/O Network 37

Add a 1794 Remote Adapter

Module

The following steps show you how to add a 1794-ASB module to your project

and set the configuration parameters.

1. Add the 1794-ASB adapter module to the controller organizer.:

2. Define configuration parameters for the 1794-ASB module.

A. From controller organizer, select the

channel you are using for your

configuration then, right-click to display

the pull-down menu.

In this example, only channel B is connected to

remote I/O. You can connect both channels to

remote I/O simultaneously if necessary. If only

one channel is connected to remote I/O, we

recommend that you use channel B. If you

connect channel A to remote I/O, you cannot

use the programming terminal din connector

on the front of the 1756-DHRIO module.

B. Choose New Module.

C. Click on the Communications group to

expand the tree and then, choose the

1794-ASB Adapter module from the list.

D. Click OK.

A. Define the following parameters:

•Name

•Rack #

•Starting Group

•Size

• Open Module Properties

Refer to the 1794-ASB Adapter Module

Properties Dialog Box table for

additional information.

B. Click OK.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 131 132

Sin comentarios

Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario Pagina 39