Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario descargar pdf (Pagina 69)

Publication 1794-UM061A-EN-P - July 2006

Configure Your Adapter and Digital Modules on a ControlNet Network 67

3. Configure the distributed I/O module. Depending on the distributed

I/O type, the configuration screens differ.

After you complete adding all Flex I/O modules to your project file, you

must download the project to your Logix5000 controller.

To: Do this:

Use the

module’s

default

configuration.

Specify the general

information about the

module (name, comm

format, RPI, and others)

and click Finish.

Customize the

configuration.

Specify the general

information about the

module (name, comm

format, RPI, and others).

Then use the Tabs to step

through subsequent

screens to configure such

parameters as filter times

and fault actions. If the

Open Module Properties is

checked, clicking OK will

automatically take you to

next tab.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 131 132

Comentarios a estos manuales

Sin comentarios