Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario descargar pdf (Pagina 43)

Publication 1794-UM061A-EN-P - July 2006

Configuring Modules for Communication on a Remote I/O Network 41

2. Configure parameters for the RIO Block Transfer module.

A. Define the following parameters:

•Name

•Group

•Slot

• Open Module Properties

Refer to the 1756-DHRIO Block Module

Transfer Parameters table for additional

information.

B. Click OK.

C. Repeat steps A and B for the Diagnostic

output module.

The I/O modules are added to the controller

organizer tree.

1756-DHRIO Block Module Transfer Parameters

In This Field: Do the following:

Name Type a name for the I/O module on the RIO network. You must name this module to be able to choose a

path from the pull-down menu for the message instruction.

Group Determine what group on the module provides the first word of I/O data. This selection is affected by

the parent module’s configuration. For example, if the parent module’s size is equal to 1/2 rack (4 I/O

groups), this module’s configuration offers the option of starting with group 0, 1, 2 or 3.

Slot Enter the location of the remote I/O module.

Open Module Properties Uncheck this box. There are no additional module properties to configure for the module.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 131 132

Sin comentarios

Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario Pagina 43