Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario descargar pdf (Pagina 83)

81 Publication 1794-UM061A-EN-P - July 2006

Chapter

Configure your Digital Module on an

EtherNet/IP Network

How to Use This Chapter

This chapter describes how a controller controls distributed I/O over an

EtherNet/IP network. The controller requires a communication module to

connect to the network. Distributed I/O modules require an adapter to

connect to the network.

In this example, we show you how to control FLEX I/O over EtherNet using

RSNetWorx for EtherNet and RSLogix 5000 software.

To control distributed I/O over EtherNet, you must:

• Add local and remote EtherNet communication modules to your

RSLogix 5000 project.

• Add distributed I/O to your RSLogix 5000 project.

• Schedule the EtherNet network via RSNetWorxRSNetWorx for

EtherNet.

• Use the I/O information in RSLogix 5000

You can also validate connections to distributed I/O when controlling it over

EtherNet. This task is particularly useful when one or more of the connections

Topic See Page

How to Use This Chapter 81

Set Up the Hardware 82

Select a Requested Packet Interval (RPI) 82

Select a Communication Format 83

Add Distributed I/O 88

Download the Program to the Controller 89

Access Distributed I/O 91

Determining Required Network Parameters 93

Assigning Network Parameters via the BOOTP/DHCP Utility 94

Using Other Methods to Assign Network Parameters 97

Duplicate IP Address Detection 100

IP Address Swapping 102

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 131 132

Sin comentarios

Rockwell-automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual Manual de usuario Pagina 83