Rockwell-automation 20-COMM-B BACnet MS/TP Adapter Manual de usuario descargar pdf (Pagina 25)

Installing the Adapter 2-9

Table 2.B Drive and Adapter Start-Up Status Indications

Verifying/Setting Key Adapter Parameters

To access adapter parameters when using the LCD HIM, navigate to the

Device Select screen. Then select the BACnet communications adapter

(20-COMM-B) and press the Enter function key.

1. Verify that adapter Parameter 08 - [MAC Address] is reporting the

MAC address set in Setting the MAC Address on page 2-2

2. Set adapter Parameter 11 - [Device Instance] to a unique number

for representation to the Building Automation Controller. For more

information, see Setting the Device Instance Number

on page 3-3.

3. Reset the adapter by setting adapter Parameter 01 - [Reset Module]

to “1” (Reset Module) so that the new Device Instance Number takes

effect.

Item Name Color State Description

Drive STS Indicator

➊

STS

(Status)

Green Flashing Drive ready but not running, and no faults are present.

Steady Drive running, no faults are present.

Yellow Flashing,

Drive Stopped

An inhibit condition exists – the drive cannot be started.

Check drive Parameter 214 - [Start Inhibits].

Flashing,

Drive Running

An intermittent type 1 alarm condition is occurring. Check

drive Parameter 211 - [Drive Alarm 1].

Steady,

Drive Running

A continuous type 1 alarm condition exists. Check drive

Parameter 211 - [Drive Alarm 1].

Red Flashing A fault has occurred.

Steady A non-resettable fault has occurred.

Adapter Status Indicators

➋

PORT Green Flashing Normal Operation. The adapter is establishing an I/O

connection to the drive. It will turn solid green or red.

Steady Normal Operation. The adapter is properly connected and

communicating with the drive

MOD Green Flashing Normal Operation. The adapter is operating but is not

transferring I/O data.

Steady Normal Operation. The adapter is operating and

transmitting I/O data.

NET A Green Flashing Normal Operation. The adapter is properly connected and

communicating on the network.

NET B Green Off Normal Operation. The adapter is properly connected but

is idle.

Flashing Normal Operation. The adapter is transmitting data.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 20-COMM-B BACnet MS/TP Adapter Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 20-COMM-B BACnet MS/TP Adapter