Rockwell-automation 20-COMM-R Remote I/O Adapter Manual de usuario Pagina 23
- Pagina / 128
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installing the Adapter 2-7
20-COMM-R Remote I/O Adapter User Manual
Publication 20COMM-UM004D-EN-P
Connecting the Adapter to
the Network
1. Remove power from the drive.
2. Use static control precautions.
3. Connect a Remote I/O cable to the controller or create a daisy-chain
from another device on the Remote I/O network (see Figure 2.5
).
Important: Maximum cable length depends on the Remote I/O baud
rate. See Selecting Remote I/O Cables
on page 2-1 for
details.
Figure 2.5 Connecting a Remote I/O Cable to the Network
4. Route the other end of the Remote I/O cable through the bottom of the
drive (Figure 2.4
).
5. Connect a 3-pin Remote I/O plug to the cable.
Figure 2.6 Connecting a 3-Pin Remote I/O Plug to the Cable
!
ATTENTION: Risk of injury or death exists. The PowerFlex
drive may contain high voltages that can cause injury or death.
Remove power from the drive, and then verify power has been
discharged before installing or removing the adapter.
Clear
Shield
Blue
Clear
Shield
Blue
Single Connection Daisy-Chain Connection
- User Manual 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- About This Manual 7
- Rockwell Automation 8
- Additional Resources 8
- Resource Description 9
- About This Manual P-3 9
- P-4 About This Manual 10
- Getting Started 11
- Features 12
- Compatible Products 13
- Required Equipment 13
- User-Supplied Equipment 14
- Safety Precautions 15
- Quick Start 16
- Installing the Adapter 17
- Commissioning the Adapter 18
- Connecting the Adapter to 20
- Applying Power 24
- 2-10 Installing the Adapter 26
- Configuring the Adapter 27
- Using the PowerFlex 7-Class 28
- HIM to Access Parameters 28
- Setting the Rack Address 29
- Setting the Baud Rate 30
- Setting the Starting Module 30
- Setting the Last Rack 31
- Setting the Rack Size 31
- Setting the I/O 32
- Configuration 32
- Setting a Fault Action 33
- Resetting the Adapter 34
- Viewing the Adapter Status 35
- Using Parameters 35
- Updating the Adapter 36
- Firmware 36
- Chapter 4 37
- Understanding the I/O Image 38
- Discrete I/O Image 40
- Size Valid Values 41
- 16-bit -32768 to 32767 41
- Block Transfer I/O Image 43
- Rules for Using Datalinks 44
- Datalink Scaling 45
- Example Ladder Logic 47
- Program Information 47
- ControlLogix Controller 48
- PLC-5 Controller Example 51
- Block Transfer Read 53
- Block Transfer Write 54
- All Controller Versions 55
- Chapter 5 59
- About Block Transfer 60
- Messaging 60
- Formatting Block Transfer 60
- Messages 60
- Executing Block Transfers 63
- Example Programs 64
- Ladder Logic Program 66
- SLC 500 Controller 69
- Examples 69
- Troubleshooting 75
- PORT Status Indicator 76
- MOD Status Indicator 76
- NET A Status Indicator 77
- Viewing Adapter Diagnostic 77
- Viewing and Clearing 79
- Table 6.B Adapter Events 80
- Specifications 81
- Regulatory Compliance 82
- Adapter Parameters 83
- CIP Objects 87
- Common Messages 88
- DPI Device Object 89
- DPI Parameter Object 91
- Descriptor Attributes 93
- Formulas for Converting 94
- Object-Specific Services 94
- DPI error code 95
- DPI Fault Object 101
- Instance Attributes 102
- DPI Alarm Object 103
- DPI Time Object 105
- C-20 CIP Objects 106
- Logic Command/Status Words 107
- Logic Status Word 108
- PowerFlex 700S (Phase II 109
- Control) and 700L (with 109
- 700S Control) Drives 109
- PowerFlex 750-Series Drives 111
- PowerFlex Digital DC Drives 113
- Glossary 115
- D Datalinks 116
- F Fault Action 117
- I Idle Action 118
- L Last RIO Rack 118
- N NVS (Nonvolatile Storage) 118
- R Rack Address 119
- S Scanner 120
- U Update 120
- Z Zero Data 120
- Rockwell Automation Support 128
- Documentation Feedback 128
Relacionado con productos y manuales para Equipo Rockwell-automation 20-COMM-R Remote I/O Adapter
Equipo Rockwell-automation 22B PowerFlex 40/400/40P IP30/NEMA 1 for Comm Opti Manual de usuario
(2 paginas)
Equipo Rockwell-automation 42JT VisiSight Photoelectric Polarized Retroreflec Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame B Bimetal Thermosta Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Field Manual de usuario
(10 paginas)
(10 paginas)
Equipo Rockwell-automation 20Y Lifting and Mounting PowerFlex Active Front En Manual de usuario
(6 paginas)
(6 paginas)
Equipo Rockwell-automation 22-HIM-C2S PowerFlex 4-Class HIM (DSI) Quick Refer Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 140G-KTFx_KTHx_KTIx_KTKx Trip Unit Installation-14 Manual de usuario
(6 paginas)
(6 paginas)
Equipo Rockwell-automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Fan A Manual de usuario
(6 paginas)
(6 paginas)
Equipo Rockwell-automation 140U N-Frame CB Alarm Switch and Alarm Auxiliary S Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 1203-SSS Smart Self-powered Serial Converter Manual de usuario
(60 paginas)
(60 paginas)
Equipo Rockwell-automation 42EF RightSight DeviceNet Photoelectric Sensors Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales