Rockwell-automation 2705 RediSTATION Operator Interface User Manual Manual de usuario descargar pdf (Pagina 12)

Publication 2705-UM001A-EN-P

1-6 Overview of RediSTATION

I/O Connector

Bulletin 800T devices connect to the 12-pin I/O connector on the

circuit board. The connector supports 4 inputs and 2 outputs. The

standard configuration uses 2 inputs and 1 output.

A separate cable attaches each 800T input or output device to the I/O

connector. The 2-wire end of the cable attaches to the screw terminals

of the device. The connector end of the cable connects to 2-pins on

the I/O connector. Unused pins are left open.

The table below shows connections for the standard configuration.

The pilot light connects to pins 1-2. The start push button connects to

pins 9-10. The stop push button connects to pins 11-12. Pins 3-8 are

unused.

The illustration on the left shows the location of the I/O connector on

the circuit board. The illustration on the right shows the terminal

labels for each device in the standard configuration.

I/O Connector

Pin#

Wire Color 800T

Terminal Labels

800T Device

1RedL1(+)

Indicator

2BlackL2(-)

9Red A3

Start Push Button

10 Black A4

11 Red A3

Stop Push Button

12 Black A4

I/O Connector

Stop

Push Button

Start

Push Button

Indicator

L1(+)

L2(-)

Pin 1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Sin comentarios

Rockwell-automation 2705 RediSTATION Operator Interface User Manual Manual de usuario Pagina 12