Rockwell-automation 2711E-ND7 PanelView File Transfer Utility User Man Manual de usuario descargar pdf (Pagina 56)

3–10 Uploading 1000e/1200e/1400e Application Files and Alarm History Files

Uploading the Alarm History Files

To upload alarm history files, you must complete these steps in

order:

• prepare the PanelView terminal for the upload

• configure the PanelView e Transfer Utility 32 for the upload

• initiate the alarm history file upload

To prepare the PanelView terminal for a serial upload:

1. Using the hardware keyswitch or the Goto Configure Mode

button, switch the PanelView terminal to the Configure mode.

2. In the Terminal Configuration screen, choose the Transfer Setup

button to display the Transfer Setup screen.

3. To change the settings, choose the Baud Rate, Parity, or Error

buttons to move the check mark to the setting you want.

• Baud RateĊThe speed at which data is transmitted over the

serial cable. The default setting for a serial transfer is

9600 baud.

• ParityĊUsed to check for accurate transmission of the data

between the development computer and terminal. The default

setting is None.

• ErrorĊUsed to check for errors in data transmission. Error

checking is either

CRCĊcyclical (or cyclic) redundancy check.

BCCĊblock check character. BCC is the default setting.

The settings that are defined in the Transfer Setup screen must

match the Transfer Utility’s settings.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 108 109

Sin comentarios

Rockwell-automation 2711E-ND7 PanelView File Transfer Utility User Man Manual de usuario Pagina 56