Rockwell-automation 2711E-ND7 PanelView File Transfer Utility User Man Manual de usuario descargar pdf (Pagina 73)

Chapter 5

Configuring Communications

Settings for 1000e/1200e/1400e

Application Transfers

This chapter provides instructions for configuring communications

settings when planning to transfer application files and Alarm

History files between the PanelView 1000e/1200e/1400e terminals

and the development computer. The communication settings must be

configured before a transfer can be started.

For PV 1200 Upload/Download configurations, refer to PV 1200

Transfer Utility Manual, publication 2711–UM010B–EN–P.

The following information and table will help you determine which

driver packages and drivers you need for your particular system

configuration, and what the appropriate transfer link will be for your

communication hardware setup. You need to know:

• what hardware you have

• what transfer link you’re using

• which driver package you’re using

• which driver options must be configured

Table 5.A provides a matrix to help determine your hardware and

driver requirements.

For DF1 Direct transfers, choose the internal drivers, Serial 1 or

Serial 2.

For DH+, use RSLinx; if you do not have RSLinx, use the Serial 1 or

Serial 2 driver to communicate over the KF2 module.

For ControlNet, use RSLinx; if you do not have RSLinx, use the

Serial 1 or Serial 2 driver to communicate over the KFC module.

For Remote I/O Pass-Through, use whichever driver you would use

for DH+, ControlNet, or Ethernet.

Note: Modbus supports only serial transfers.

Selecting Communication

Hardware and Driver

Packages

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 108 109

Sin comentarios

Rockwell-automation 2711E-ND7 PanelView File Transfer Utility User Man Manual de usuario Pagina 73